How To Fix The Lamp
There are several types of lamps are available in electrical and electronics stores. Anything can be fixed and there should be wasted, sorry because until this moment the author has never found a way of utilization.
In this paper will explain how to repair the lights tl form of a finger or more precise electronic tl lights. Image as below.
In this paper will explain how to repair the lights tl form of a finger or more precise electronic tl lights. Image as below.
Lamp
Lights in the picture above can still be repaired cannibals (by taking a kind of light component) on condition that some components of the lamp is still functioning. Simply put the lamp is divided into three main parts, namely:
a. Connector part or fitting into the AC network. See the following figure.
b. Electronic parts or electronic ballast which is a switching system, this part is frequently damaged. See picture.
b. Parts Of Electronic Components
c. Part filament or tube lights. This section also often damaged in the form of a wire filament to break up. See the following figure.
c. Electronic Light Tubes
In some brand lights, which are often damaged part is the filament in a glass tube, is characterized by damage to the base of the glass tube is black. At this damage the electronic chain of custody is usually still good. See picture.
To know the good and bad on the tube filament lamp used multimeter ohm switch position on a scale of meters x1 or x10. If you do not have a multimeter, be sure the filament is broken, if the base of the tube is black.
While the characteristics of the lamp is still good tl finger lamp filaments are usually dead, but the color is still white tubes there is no black at the base of the tube. At these events are usually defective electronic parts. Keep in mind that almost all brands TL lamps Rp.5000 finger at a price range, using the same active component of the series transistor NPN 13 001 or 13 002. Except in a valuable brand over Rp.20.000, - like Philips.
Different damage to the lamp tljari various brands but still this kind that we can use to repair.
To know the good and bad on the tube filament lamp used multimeter ohm switch position on a scale of meters x1 or x10. If you do not have a multimeter, be sure the filament is broken, if the base of the tube is black.
While the characteristics of the lamp is still good tl finger lamp filaments are usually dead, but the color is still white tubes there is no black at the base of the tube. At these events are usually defective electronic parts. Keep in mind that almost all brands TL lamps Rp.5000 finger at a price range, using the same active component of the series transistor NPN 13 001 or 13 002. Except in a valuable brand over Rp.20.000, - like Philips.
Different damage to the lamp tljari various brands but still this kind that we can use to repair.
0 Response to "How To Fix The Lamp"
Post a Comment